Technical specifications for the operation of hedge trimmers

(1) Before operation, the hedge trimmer should be checked. Including but not limited to the tightness of the link, the wear of the blade, the remaining power of the battery, etc.

(2) When working at heights more than 3 meters from the ground, wear soft-soled cloth or rubber shoes, and must be equipped with safety belts (ropes), and trouser legs should be fastened (the use of hedge trimmers also involves high-altitude operations, and some Some taller branches are pruned).

(3) When working at heights, the staff under the tree should cooperate closely. The operator should notify the person working under the tree before the branch is broken, and the operator under the tree should remind the pedestrians to be safe (of course, the branches trimmed with a hedge trimmer are generally It will not be too thick. For the thick trunk, a chainsaw should be used, only for branches of about 3cm).

(4) The edge of the pruning shears should be sharp, so as to facilitate the smooth cutting and ensure the wound healing of the branches. When thinning branches, the branches with equal roots should be cut off without leaving stubble to avoid short spikes.

(5) When pruning green plants, the hand speed should be stable and fast, so that the pruning effect is better.

(6) When the cut branches are thick, the incision should not be flush with the attached branches, but should be slightly inclined outward to avoid the incision being too large.