Three Common Faults And Solutions Of Hedge Trimmers

The hedge trimmer is a powerful tool in the garden trimming industry. Now all walks of life are mechanized, and so is garden trimming. Because the machine can save time and reduce labor intensity. The hedge trimmer is the key machine introduced today. It is a mechanical tool for pruning green plants, shrubs and plants. The output shaft of the motor is equipped with a blade. The blade uses the motor to rotate at high speed to achieve the function of cutting branches, which is convenient and durable. However, when the hedge trimmer is used for a long time, various problems will occur.

1. Inability to repair

Pay attention to whether the blade is sharp, if it is dull, it needs to be sharpened. In addition, check whether the leaves of the pruning object are thick and the branches are thick. If so, reduce the pruning speed and reduce the load on the motor.

2. Battery problem

As the working time of the motor increases, the matching lithium battery will heat up, and the backpack type lithium battery is equipped with a cooling system. Even so, in the actual use process, it is recommended to rest for a period of time after long-term use, not only to let the temperature of the supporting lithium battery drop, but also to let the staff take a break.

3. Abnormal noise

Generally speaking, the internal parts of the hedge trimmer are damaged, and it is necessary to stop and check when an abnormality is found during use. Such failures are more troublesome. Because it takes time to determine which fault occurs, it usually takes half an hour to an hour to find out the fault and then repair it.